listing for G
gendisk - Produces magnetic disk distribution media
/usr/bin/gendisk [-d] [-i] [-k filename] [-w] [-v] [hostname:] prodID
-d Creates a distribution disk in direct CD format. This means that the
distribution disk contains uncompressed file systems that are laid out
just as the software is installed on the system.
-i Creates a distribution disk in ISO 9660 format. This means that the
distribution disk contains an ISO 9660-compliant CD-ROM file system
Uses an alternate kit descriptor database, filename, on the local
system. You may use either a full absolute pathname or a relative
pathname from the directory where you run the gendisk utility. The
file does not have to be named kitcap.
-w Writes the product media without verification, if used without the -v
option. If used with the -w option, the gendisk utility writes and then
verifies the product media.
-v Verifies the product media without writing it first, if used without
the -w option. This assumes that you have already written kit files to
the distribution media. If used with the -w option, the gendisk
utility writes and then verifies the product media.
The optional hostname: operand is the name of a remote machine that
contains the kit descriptor database. The gendisk utility searches the
kit descriptor database on the remote machine for the kit identifier
(prodIDHD) and uses it to create the distribution media. The colon (:)
is a required delimiter for TCP/IP networks, and space is permitted
between the colon and the prodID. For example, if the product code is
OAT100 and you are using the kit descriptor database on node mynode,
use mynode:OAT100 for this option.
The mandatory prodID operand is a kit identifier consisting of the
product code and version number specified in the CODE and VERS fields
of the kit's key file. Refer to the Guide to Preparing Product Kits for
information about the key file.
The mandatory devname operand specifies the device special file name
for a raw or character disk device such as /dev/rdisk/dsk1. The gendisk
utility uses the disk partition specified in the kit descriptor and
ignores any partition specified on the command line.
Use the gendisk utility to produce disk distribution media. The gendisk
utility performs the following tasks:
1. Searches the kit descriptor database for the prodID specified on the
command line. The default kit descriptor database is the /etc/kitcap
2. Creates a new file system on the disk partition specified in the kit
3. Mounts the disk containing the new file system.
4. Asks whether you want to clean the whole disk before writing to it. If
you do, the gendisk utility erases the entire contents of the disk and
writes a new disk label using default information.
5. Copies files and subsets specified in the kit description to the
6. If you specified verification, uses the sum utility to verify file
transfer accuracy. Refer to the sum(1) reference page for more
information about this utility.
7. Unmounts the file system.
If you use the -k option, you can use any valid file name for the alternate
kit descriptor database and may specify either an absolute or relative path
to the file location.
If you do not use either of the -w or -v options, the gendisk utility
writes and then verifies the files in the kit descriptor. This default
behavior is the same as when you use both the -w and -v options together.
The gendisk utility can create multiple directories on the disk for
separate products or combine multiple products into one product, as
specified in the kit descriptor database.
You must have root privileges to run this program. If you use the optional
hostname operand, you must have root privileges to access files on the
If you do not use the optional hostname operand, you can access the files
used by the gendisk utility only if you add the local hostname to the local
/.rhosts file, for example: hostname root.
The gendisk utility does not support chained disk kits. A kit written to
diskette must either fit onto a single diskette or be packaged as a set of
kits on separate diskettes.
Device special files for raw or character disk devices
Default kit descriptor database
Guide to Preparing Product Kits
listing for G