listing for R
rmvol - Removes a volume from an existing domain
/usr/sbin/rmvol [-f] [-v] special domain
-f Forces the removal of a volume that contains one or more stripe
segments without first requesting confirmation.
-v Displays messages that describe which files are moved off the specified
volume. Using this option slows the rmvol process.
Specifies the block device special file name, such as /dev/disk/dsk2c,
of the volume that you are removing from the domain. This command
supports shorthand device names for block special devices. For example,
if you enter dsk2g, it will be translated to /dev/disk/dsk2g.
Specifies the name of the domain.
The rmvol utility enables you to decrease the number of volumes within an
existing domain. When you attempt to remove a volume, the file system
automatically migrates the contents of that volume to another volume in the
The logical structure of the filesets in a domain is unaffected when you
remove a volume. If you remove a volume that contains a stripe segment, the
rmvol utility moves the segment to another volume that does not already
contain a stripe segment of the same file. If a file is striped across all
volumes in the domain, the utility requests confirmation before placing a
second stripe segment on a volume that has one.
Before you can remove a volume from a domain, all filesets in the domain
must be mounted. If you try to remove a volume from an active domain that
includes unmounted filesets, the system displays an error message
indicating that a fileset is unmounted. This message is repeated until you
mount all filesets in the domain.
If you attempt to remove a volume from an inactive domain, the system
returns the ENO_SUCH_DOMAIN error message. A domain is inactive when none
of its filesets is mounted. In this case, the rmvol command does not remove
If there is not enough free space on other volumes in the domain to accept
the offloaded files from the departing volume, the rmvol utility moves as
many files as possible to free space on other volumes. Then a message is
sent to the console indicating that there is not enough space to complete
the procedure. The files that were not yet moved remain on the original
You can interrupt the rmvol process without damaging your domain. AdvFS
will stop removing files from the volume. Files already removed from the
volume will remain in their new location. Interrupting an rmvol operation
with a system crash, a power failure, loosing the remote login, or the kill
command can leave the volume in an inaccessible state. If a volume does not
allow new allocations after an rmvol operation, use the chvol -A command to
reactivate the volume.
You cannot run the rmvol utility while the defragment, balance, rmfset, or
rmvol utility is running on the same domain.
You must be the root user to use this utility.
This command supports shorthand names for LSM volume names. For example, if
you enter the following:
# rmvol testdg.vol1 dom1
the volume name will be translated to:
# rmvol /dev/vol/testdg/vol1 dom1
1. The following example removes a volume from an active domain called
accounts_dmn. The domain contains two volumes, /dev/disk/dsk1c and
/dev/disk/dsk2c. This example removes volume /dev/disk/dsk1c from the
# rmvol dsk1c accounts_dmn
The /etc/fdmns/accounts_dmn subdirectory now has only one entry, the
entry for /dev/disk/dsk2c.
2. The following example removes one volume from a three-volume domain.
Each volume in the accounts_dmn domain contains one segment of
/usr/myfile, which is a three-way striped file:
# rmvol dsk3c accounts_dmn
rmvol: Removing volume '/dev/disk/dsk3c' from domain 'accounts_dmn'
This volume contains one stripe segment of /usr/myfile, which will
be moved to another volume in the domain that already
contains a stripe segment of /usr/myfile.
Do you want to continue? (y/n):y
One volume in the accounts_dmn domain now contains two stripe segments
of myfile, which is no longer an optimally striped file.
Specifies the command path.
Contains domain names and devices.
addvol(8), advfs(4), advscan(8), chvol(8), fdmns(4), mkfdmn(8), stripe(8)
listing for R