mysqld_safe - MySQL server startup script
safe_mysqld - MySQL server startup script
mysqld_safe is the recommended way to start a mysqld server on Unix and
NetWare. mysqld_safe adds some safety features such as restarting the
server when an error occurs and logging runtime information to an error log
file. NetWare-specific behaviors are listed later in this section.
Note: To preserve backward compatibility with older versions of MySQL,
MySQL binary distributions still include safe_mysqld as a symbolic link to
mysqld_safe. However, you should not rely on this because it is removed as
of MySQL 5.1.
By default, mysqld_safe tries to start an executable named mysqld-max if it
exists, and mysqld otherwise. Be aware of the implications of this
· On Linux, the MySQL-Max RPM relies on this mysqld_safe behavior. The RPM
installs an executable named mysqld-max, which causes mysqld_safe to
automatically use that executable rather than mysqld from that point on.
· If you install a MySQL-Max distribution that includes a server named
mysqld-max, and then upgrade later to a non-Max version of MySQL,
mysqld_safe will still attempt to run the old mysqld-max server. If you
perform such an upgrade, you should manually remove the old mysqld-max
server to ensure that mysqld_safe runs the new mysqld server.
To override the default behavior and specify explicitly the name of the
server you want to run, specify a --mysqld or --mysqld-version option to
mysqld_safe. You can also use --ledir to indicate the directory where
mysqld_safe should look for the server.
Many of the options to mysqld_safe are the same as the options to mysqld.
See the section called COMMAND OPTIONS.
All options specified to mysqld_safe on the command line are passed to
mysqld. If you want to use any options that are specific to mysqld_safe and
that mysqld doesn't support, do not specify them on the command line.
Instead, list them in the [mysqld_safe] group of an option file. See
Section 3.2, Using Option Files.
mysqld_safe reads all options from the [mysqld], [server], and
[mysqld_safe] sections in option files. For backward compatibility, it also
reads [safe_mysqld] sections, although you should rename such sections to
[mysqld_safe] in MySQL 5.0 installations.
mysqld_safe supports the following options:
Display a help message and exit. (Added in MySQL 5.0.3)
(NetWare only) On NetWare, mysqld_safe provides a screen presence. When
you unload (shut down) the mysqld_safe NLM, the screen does not by
default go away. Instead, it prompts for user input:
*<NLM has terminated; Press any key to close the screen>*
If you want NetWare to close the screen automatically instead, use the
--autoclose option to mysqld_safe.
The path to the MySQL installation directory.
The size of the core file that mysqld should be able to create. The
option value is passed to ulimit -c.
The path to the data directory.
The name of an option file to be read in addition to the usual option
files. This must be the first option on the command line if it is used.
As of MySQL 5.0.6, if the file does not exist or is otherwise
inaccessible, the server will exit with an error.
The name of an option file to be read instead of the usual option files.
This must be the first option on the command line if it is used.
If mysqld_safe cannot find the server, use this option to indicate the
pathname to the directory where the server is located.
Write the error log to the given file. See Section 10.1, The Error Log.
The name of the server program (in the ledir directory) that you want to
start. This option is needed if you use the MySQL binary distribution
but have the data directory outside of the binary distribution. If
mysqld_safe cannot find the server, use the --ledir option to indicate
the pathname to the directory where the server is located.
This option is similar to the --mysqld option, but you specify only the
suffix for the server program name. The basename is assumed to be
mysqld. For example, if you use --mysqld-version=max, mysqld_safe starts
the mysqld-max program in the ledir directory. If the argument to
--mysqld-version is empty, mysqld_safe uses mysqld in the ledir
Use the nice program to set the server's scheduling priority to the
Do not read any option files. This must be the first option on the
command line if it is used.
The number of files that mysqld should be able to open. The option value
is passed to ulimit -n. Note that you need to start mysqld_safe as root
for this to work properly!
The pathname of the process ID file.
The port number that the server should use when listening for TCP/IP
connections. The port number must be 1024 or higher unless the server is
started by the root system user.
The Unix socket file that the server should use when listening for local
Set the TZ time zone environment variable to the given option value.
Consult your operating system documentation for legal time zone
Run the mysqld server as the user having the name user_name or the
numeric user ID user_id. (User in this context refers to a system login
account, not a MySQL user listed in the grant tables.)
If you execute mysqld_safe with the --defaults-file or
--defaults-extra-option option to name an option file, the option must be
the first one given on the command line or the option file will not be
used. For example, this command will not use the named option file:
mysql> mysqld_safe --port=port_num --defaults-file=file_name
Instead, use the following command:
mysql> mysqld_safe --defaults-file=file_name --port=port_num
The mysqld_safe script is written so that it normally can start a server
that was installed from either a source or a binary distribution of MySQL,
even though these types of distributions typically install the server in
slightly different locations. (See Section 4.6, Installation Layouts.)
mysqld_safe expects one of the following conditions to be true:
· The server and databases can be found relative to the working directory
(the directory from which mysqld_safe is invoked). For binary
distributions, mysqld_safe looks under its working directory for bin and
data directories. For source distributions, it looks for libexec and var
directories. This condition should be met if you execute mysqld_safe
from your MySQL installation directory (for example, /usr/local/mysql
for a binary distribution).
· If the server and databases cannot be found relative to the working
directory, mysqld_safe attempts to locate them by absolute pathnames.
Typical locations are /usr/local/libexec and /usr/local/var. The actual
locations are determined from the values configured into the
distribution at the time it was built. They should be correct if MySQL
is installed in the location specified at configuration time.
Because mysqld_safe tries to find the server and databases relative to its
own working directory, you can install a binary distribution of MySQL
anywhere, as long as you run mysqld_safe from the MySQL installation
shell> cd mysql_installation_directory
shell> bin/mysqld_safe &
If mysqld_safe fails, even when invoked from the MySQL installation
directory, you can specify the --ledir and --datadir options to indicate
the directories in which the server and databases are located on your
Normally, you should not edit the mysqld_safe script. Instead, configure
mysqld_safe by using command-line options or options in the [mysqld_safe]
section of a my.cnf option file. In rare cases, it might be necessary to
edit mysqld_safe to get it to start the server properly. However, if you do
this, your modified version of mysqld_safe might be overwritten if you
upgrade MySQL in the future, so you should make a copy of your edited
version that you can reinstall.
On NetWare, mysqld_safe is a NetWare Loadable Module (NLM) that is ported
from the original Unix shell script. It starts the server as follows:
1. Runs a number of system and option checks.
2. Runs a check on MyISAM tables.
3. Provides a screen presence for the MySQL server.
4. Starts mysqld, monitors it, and restarts it if it terminates in error.
5. Sends error messages from mysqld to the host_name.err file in the data
6. Sends mysqld_safe screen output to the host_name.safe file in the data
Copyright 1997-2007 MySQL AB
This documentation is NOT distributed under a GPL license. Use of this
documentation is subject to the following terms: You may create a printed
copy of this documentation solely for your own personal use. Conversion to
other formats is allowed as long as the actual content is not altered or
edited in any way. You shall not publish or distribute this documentation
in any form or on any media, except if you distribute the documentation in
a manner similar to how MySQL disseminates it (that is, electronically for
download on a Web site with the software) or on a CD-ROM or similar medium,
provided however that the documentation is disseminated together with the
software on the same medium. Any other use, such as any dissemination of
printed copies or use of this documentation, in whole or in part, in
another publication, requires the prior written consent from an authorized
representative of MySQL AB. MySQL AB reserves any and all rights to this
documentation not expressly granted above.
Please email <firstname.lastname@example.org> for more information.
make_win_bin_dist(1), msql2mysql(1), my_print_defaults(1),
myisam_ftdump(1), myisamchk(1), myisamlog(1), myisampack(1), mysql(1),
mysql.server(1), mysql_config(1), mysql_explain_log(1),
mysql_fix_privilege_tables(1), mysql_install_db(1), mysql_tzinfo_to_sql(1),
mysql_upgrade(1), mysql_zap(1), mysqlaccess(1), mysqladmin(1),
mysqlbinlog(1), mysqlcheck(1), mysqld(8), mysqld_multi(1), mysqldump(1),
mysqlhotcopy(1), mysqlimport(1), mysqlmanager(8), mysqlshow(1),
ndb_config(1), ndb_cpcd(1), ndb_delete_all(1), ndb_desc(1),
ndb_drop_index(1), ndb_drop_table(1), ndb_error_reporter(1), ndb_mgm(1),
ndb_mgmd(1), ndb_print_backup_file(1), ndb_print_schema_file(1),
ndb_print_sys_file(1), ndb_restore(1), ndb_select_all(1),
ndb_select_count(1), ndb_show_tables(1), ndb_size.pl(1), ndb_waiter(1),
ndbd(1), perror(1), replace(1), safe_mysqld(1)
For more information, please refer to the MySQL Reference Manual, which may
already be installed locally and which is also available online at
MySQL AB (http://www.mysql.com/). This software comes with no warranty.